Stopped with someone on it

Stannah stairlift stuck on the stairs: what to do

A Stannah stairlift stuck on the stairs with someone on it needs the person seen to first and the lift second. If they are hurt, unwell or cannot get off safely, call 999. If they are safe, Stannah's own advice is to stay seated and see whether the lift can be restarted or help summoned. Each maker's guide then gives a short restart from the seat, using only the key and the controls. None of them asks an owner to wind the lift by hand.

Last checked: , against the makers' own documents Published by SEO Dons Ltd

When to call 999

The NHS says 999 is for life-threatening emergencies (NHS: when to call 999web page). Someone who has fallen, is hurt, is unwell, or is stuck and cannot get off safely needs help before the lift does.

1. The person

Stannah's troubleshooting page says that if a stairlift stops on the stairs, it is best to stay seated and see if you can restart it or summon assistance, and that anyone who has to get off should make sure they can do so safely, take it slowly and ideally have someone help (Stannah troubleshooting tipsweb page). Acorn's manuals say the same in their own words: remain calm, with both arms down (Acorn 130 manualp.28). Stannah, Acorn and Handicare all recommend having a way to call for help, such as a mobile phone, whenever the lift is used alone.

2. The maker's restart, from the seat

Stannah

Turn the power key off and back on (on a 600, take it out and put it back), then push and hold the control downwards; after a few seconds the lift should start. If it stops again, repeat until you reach the bottom and can get off safely, then call your local Stannah branch and ask for an engineer (Stannah 260 support pageweb page). If the restart does not work, Stannah's guides say to alert another person in the home and ask them to call your supplier. Only as a last resort do they suggest swivelling the chair towards the top of the stairs, undoing the seatbelt and getting off up the stairs (Stannah 600 guidep.23).

Acorn

Release the direction control on the armrest and press it again in the opposite direction. If getting off part way cannot be avoided, swivel the seat towards the stairs with the lever at the side of the seat, make sure it has locked, and undo the seatbelt only once the seat faces the stairs and is locked (Acorn 180 manualpp.18-19). Acorn's general rule is not to get off until the lift has reached the top or bottom.

Handicare

Letting go of the toggle stops a Handicare 1100; its manual says wait three seconds and push and hold the toggle again in the direction you want (Handicare 1100 manualp.4). If the emergency stop button is lit, one press releases it. On a Freecurve stopped at a faulty hinge, Handicare's TechTool describes a built-in safety override for someone on the lift: hold the toggle upwards, and after about 15 seconds the lift travels to the top of the stairs so they can get off (Handicare TechTool, Freecurveweb page).

3. What never to try

  • Hand winding, hand cranks or "manual override". Stannah's 260 and 420 guides and Acorn's manuals do describe a hand-winding tool, and Stannah's 600 an emergency drive behind an access door. Each involves taking off a cap or opening a door on the lift, and Stannah warns never to use the lift with the hand-winding tool in place. This guide leaves all of them to an engineer.
  • Lifting the person off a chair that is not locked. Both Stannah and Acorn want the seat swivelled and locked before anyone gets off.
  • Pressing, holding or taping a safety edge to make the lift move. The edges are what stops it hurting someone.
  • Opening any cover or touching wiring, whatever a video shows.

"Stannah stairlift stuck at top" and "Acorn stuck halfway"

A Stannah that stops at the top, with the person able to get off, is usually saying something about its seat or switches: a 600 shows a code, and a 260 or 420 is read by its power light. Its Stannah page walks through those checks. An Acorn that stops halfway and shows an E code has usually met an obstruction with a safety edge; reversing it, as the manual says, often frees it. The codes are on Acorn error codes, and repeated stops are covered on keeps stopping.

4. Then the lift

Once everyone is safe, the lift can wait for an engineer. Note what the display or lights showed and where it stopped. If the lift is under a warranty or a service plan, call that number first; Stannah suggests keeping your local branch's number handy for exactly this. For a repair quote, the form at the foot of this page reaches SEO Dons Ltd, which replies by email. It is not a way to get help to someone who is stuck now: for that, call 999 or the people listed above.

Where this comes from

Each meaning, check and number above is taken from the documents listed here, opened on the maker's own website. Page numbers in the text are the numbers printed in each manual. How the makers' documents are checked.

Get a stair lift repair quote

For when the maker's manual says it is a job for an engineer. Give the make, the model and what the lift shows or does. Replies come by email, so this is not the way to get help for someone stuck on a lift now.

After you press send

  1. SEO Dons Ltd, which publishes Stairlift Support, receives what you send.
  2. Someone reads the make, the model and the fault, and replies by email.
  3. There is no obligation: asking does not commit you to any repair.
Add the model and the exact code, light or beep (optional)

Stairlift Support is published by SEO Dons Ltd, which has no engineers and no link to any stair lift maker. Answers come by email. Someone stuck on a stair lift who is hurt or in danger needs 999, not this form. How details are used: privacy notice.

Get a stair lift repair quote
Get a stair lift repair quote