Stannah · troubleshooting

Stannah stairlift problems: what Stannah tells owners to check

Most Stannah stairlift problems an owner meets come down to power, position or an obstruction, and Stannah's own pages say so. Its troubleshooting pages and user guides give checks for a lift that will not move, beeps, runs slowly, stops short or ignores its remote, and list when to call a Stannah branch. This page gathers them by model: the straight 600, which shows numbered codes, and the 260 and 420, which do not.

Last checked: , against the makers' own documents Not affiliated with any manufacturer

Pick your model

The model number is printed on the lift's product label; the 600 guide shows it on the carriage. Stannah's user guides are listed by model and chair style in the manual finder.

Not working at all

Stannah's first question is whether the lift is getting power, and it has several switches, all of which must be on (Stannah beeping pageweb page). Its beeping page describes them on a typical lift: a red on/off switch on the arm with a light around it that shows when it is on; a key switch and a master switch under the seat at the front of the carriage, the key fully in and turned on and the master switch pressed to "I"; and the socket the lift is plugged into, near the top or bottom of the stairs, switched on. Each model's guide shows exactly where its own switches are, and the positions differ between the 600, 260 and 420.

Will not move, or stops short

With the power on, Stannah's next checks are the seat, swivelled back to its travelling position, and the safety edges, with nothing against them (Stannah troubleshooting tipsweb page). If a lift stops before the top of the stairs, Stannah suggests looking for objects or blockages first, then checking that the rail is clean, dry and not over-lubricated; it says you can wipe the rail with a lightly damp cloth if you feel safe doing so, and check that any hinged rail is in the right position. A 600 tells you more on its display: code 3 is an obstruction, 4 the key or switch, 5 the arms or seat sensor, 6 the immobiliser seatbelt and 7 the seat position. Keeps stopping compares every make.

Beeping

Parked and beeping means not charging. On a curved Stannah the chair has to be right at the end of its rail to charge, and a lowered hinged rail makes it beep until it is raised. Stannah's checks, and the way its 260 and 420 guides let you silence the beeper, are on Stannah beeping.

Running slowly

Stannah says slow running is commonly a battery problem: a lift that goes slower than usual, slows as it climbs, or stops after a short distance and then carries on. Its first checks are that the power is on at the wall and the chair is parked correctly so it can charge; if it persists, contact your local service branch (Stannah beeping pageweb page, Stannah batteries pageweb page). Batteries are never an owner's job on a Stannah. See battery problems.

The automatic swivel has stopped

Stannah's answer is a repair by your local branch, and in the meantime, the manual swivel levers under the seat. Its 600 guide adds how to swivel the seat by hand: master power switch off, then push both levers inwards (600 Siena guidep.20). The seat has to be back in its travelling position before the lift will run.

The remote does nothing

Dead batteries are the most common cause, Stannah says; they last about a year, and each remote takes three AA batteries. Before changing them, check the power key is in and on, because the remotes do not work without it (Stannah remote pageweb page). Replacement or extra remotes come from your local service branch. See remote not working.

Stannah's own top tips

  • Carry a mobile phone when you use the lift alone, so you can alert someone if you need help.
  • Keep the number of your local Stannah service branch or supplier handy for emergencies.
  • Have someone else around when you are working through a problem, if you can.
  • If the lift stops on the stairs, stay seated and see if you can restart it or summon help; if you have to get off, make sure you can do it safely and take it slowly.

From Stannah's troubleshooting page, in this guide's words.

What this guide leaves to Stannah's engineers

Stannah's guides say never to try to dismantle the lift. They also describe an emergency drive on the 600, hand-winding tools on the 260 and 420 and an override handle for hinged rails; those are not set out here. Batteries, a noisy motor and anything behind a cover are an engineer's job.

"How to fix a Stannah stairlift"

As an owner, you can put right what the guide gives you to check: switches, the key, the charge point, the seat, the belt and an obstruction. Everything else is for Stannah or another engineer, and if the lift is under a warranty or a service plan, that comes first. Stairlift Support is independent and not affiliated with Stannah; the repair quote form on this page reaches SEO Dons Ltd, which replies by email. Other makes: Acorn, Handicare, Brooks.

Where this comes from

Each meaning, check and number above is taken from the documents listed here, opened on the maker's own website. Page numbers in the text are the numbers printed in each manual. How the makers' documents are checked.

Get a stair lift repair quote

For when the maker's manual says it is a job for an engineer. Give the make, the model and what the lift shows or does. Replies come by email, so this is not the way to get help for someone stuck on a lift now.

After you press send

  1. SEO Dons Ltd, which publishes Stairlift Support, receives what you send.
  2. Someone reads the make, the model and the fault, and replies by email.
  3. There is no obligation: asking does not commit you to any repair.
Add the model and the exact code, light or beep (optional)

Stairlift Support is published by SEO Dons Ltd, which has no engineers and no link to any stair lift maker. Answers come by email. Someone stuck on a stair lift who is hurt or in danger needs 999, not this form. How details are used: privacy notice.

Get a stair lift repair quote
Get a stair lift repair quote